Airbag Fasteners, Checking After Collision

All Damaged Fastening Elements must Always be Replaced. Reshaping the Components or >>making them fit<< is Not Permitted.

The following components must be checked after every airbag deployment.

With Front Passenger Airbag Deployment:

• Instrument panel crossmember; front passenger airbag supports and passenger airbag unit must be installed free of tension. Otherwise the crossmember is to be replaced.
• Check the glove compartment for damage. Replace the glove compartment if damaged.

With Driver Airbag Deployment:

• Steering wheel: Remove the steering wheel and place it with the steering wheel rim on a flat surface. The entire steering wheel rim must rest on the surface. Otherwise the steering wheel should be replaced.
• Check steering wheel for smoke residue. If smoke residue is present, replace the steering wheel.