Overview - Transmission Mount

Fig 1: Exploded View Of Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

Mount
- For the side transmission mount
Side Transmission Mount
- Transmission Mount Valve 1 -N262- right
- Transmission Mount Valve 2 -N263- left
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- 20 Nm
Side Transmission Support
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- 55 Nm
Bolt
- Tightening specifications. Refer to ASSEMBLY MOUNTS (4.0L) .
Tunnel Crossmember
- Removing and Installing. Refer to ASSEMBLY MOUNTS (4.0L) .
Bolt
- 40 Nm
Nut
- Only remove when the transmission mount must be separated from the transmission support
- 20 Nm
Rear Transmission Support
- Removing and installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Rear Transmission Mount
- Removing and installing. Refer to REAR TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Stop
- For the rear transmission mount
Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Always replace after removing
- 20 Nm +90°
Nut
- 20 Nm
Bolt
- 10 Nm
Heat Shield
Washer
Bolt
- 55 Nm
Bolt
- 20 Nm