Overview - Coolant Pump/Coolant Thermostat

Fig 1: Exploded View Of Coolant Pump/Coolant Thermostat

Courtesy of AUDI

1. Map Controlled Engine Cooling Thermostat -F265-
   • Removing and Installing. Refer to Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
2. Bolt
   • 9 Nm
3. Bolt
   • Tightening specification and sequence. Refer to Fig 3.
4. Right Front Coolant Pipe
   • Equipped on some models
5. Bolt
   • For  OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT
   • Tightening specification. Refer to OVERVIEW - COOLANT PIPES .
6. O-Ring
   • Included in a delivery package  OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT, cannot be delivered separately
   • Check for damage
7. Seal
   • Replace after removing
8. Connection
   • Replace after removing
9. Bleeder Line
10. Bolt
    • 9 Nm
11. Bolt
    • Tightening Specifications and Sequence. Refer to Fig 2.
12. Coolant Pump
    • Removing and Installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
13. Vacuum Hose
14. Seal
    • Replace after removing
15. Oil Pressure Sensor -G10-
    • Overview. Refer to OVERVIEW - OIL PRESSURE SWITCH/OIL PRESSURE REGULATION .
16. O-Ring
    • Replace after removing
17. O-Ring
    • Replace after removing
18. Seal
    • Replace after removing
19. Housing for the Map Controlled Engine Cooling Thermostat -F265-
    • There are different versions. Refer to the appropriate Electronic Parts Information.
    • Removing and Installing. Refer to HOUSING FOR Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
20. Seal
    • Replace the Map Controlled Engine Cooling Thermostat -F265- after removing
21. O-Ring
    • Replace after removing

Coolant Pump - Tightening Specifications and Sequence

Fig 2: Coolant Pump - Tightening Sequence

Courtesy of AUDI

-- Tighten the bolts -1 to 7- in stages as follows:

Housing for the Map Controlled Engine Cooling ThermostatF265 - tightening specifications and sequence

Fig 3: Housing for the Map Controlled Engine Cooling Thermostat -F265- - Tightening Specification and Sequence

Courtesy of AUDI

-- Tighten the bolts -1 to 9- is stages as shown.