Auxiliary Radiator, Removing And Installing: Installing
Install in the reverse order of removal while noting the following:
- If there are small impressions on the slats, refer to RADIATOR AND CONDENSER ASSEMBLY .
- Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
-- If the rubber bushing -3- has been loosened from the bracket -4- reinsert the rubber bushing -3- in the bracket -1-.
-- The rubber bushing -5- is pushed together with the auxiliary radiator for transmission fluid cooling -1- in the bracket -4-.
-- Insert the auxiliary radiator for the left and right transmission fluid cooler -1- carefully in the bracket -4- -B arrows-.
-- Install the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .