Coolant Expansion Tank, Removing And Installing: Removing

Courtesy of AUDI OF AMERICA, LLC

-- Lift the clamp -2- and remove the breather line -3-.

-- Remove the bolts -arrows-.

-- Remove the coolant expansion tank upward from the bracket -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector -1- for Engine Coolant Level Sensor -G32- and disconnect.

-- To catch the coolant, place a suitable drip tray under the coolant expansion tank.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hose -5- with Hose Clamps - Up To 25mm:3094  .

-- Lift the clip -4-, remove the coolant hose -5- and allow the coolant to drain.

-- Remove the coolant expansion tank.