Right Coolant Pipe On Transmission, Removing And Installing: Removing

-- Remove the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .

-- Remove the right subframe shield upper section. Refer to SUBFRAME SHIELD, REMOVING AND INSTALLING .

-- Place a cloth underneath to catch any escaping coolant.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses with Hose Clamps - Up To 25mm:3094  .

-- Loosen the hose clamps -arrows- and remove the coolant hoses.

-- Remove the bolts -1 and 2- and remove the coolant pipe.