Rear Coolant Pipe 6, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Replace the O-ring after removal.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
• Used coolant cannot be used again.

-- Coat the new O-ring with coolant.

-- Install the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the particulate filter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .