LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Rear Coolant Pipe 2, Removing And Installing >> Removing

Rear Coolant Pipe 2, Removing And Installing: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Vehicles with Catalytic Converter

-- Remove the right catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

Vehicles with a Particulate Filter

-- Remove the right particulate filter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

Continuation for All Vehicles

GWWA19-12865Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the rear coolant pipe 6 -2- from the rear coolant pipe 2.

-- Lift the clamp -2- and remove the coolant hose.

GWWA19-12866Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and the coolant pipe -1-.