LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Cooling System (8-Cylinder Direct Injection 4.0L 4V TFSI Engine Ea825) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Coolant Pipe On SUBFRAME, Removing And Installing >> Removing

Left Coolant Pipe On SUBFRAME, Removing And Installing: Removing

-- Lower the subframe. Refer to SUBFRAME, LOWERING .

-- Place a cloth underneath to catch any escaping coolant.

GWWA19-13388Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the coolant hoses -2 and 5- with Hose Clamps - Up To 25mm:3094  .

-- Loosen the hose clamps -1 and 4- and remove the coolant hoses -2 and 5-.

-- Remove the bolt and nut -arrows-.

-- Remove the coolant pipe -3-.