Coolant Pipe To Lock Carrier, Removing And Installing, Vehicles Without Auxiliary Radiator For Transmission Fluid Cooling: Removing
-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Place a cloth underneath to catch any escaping coolant.
-- Disconnect the coolant hoses -1 and 5- with Hose Clamps - Up To 25mm:3094 .
-- Remove the coolant hoses -1 and 5- from the coolant pipe -3- to do so loosen the hose clamps -2 and 4-.
-- Remove the left and right bolt -arrow- and remove the coolant pipe -3-.