Refrigerant Lines, Removing And Installing, From Rear Expansion Valve To Evaporator In Rear Heater And A/C Unit: Removing
-- Switch off the ignition.
-- Discharge the refrigerant circuit. Refer to Refrigerant Circuit (R134a) or Working with A/C Service Station (R1234ya) (1 of 2) or Working with A/C Service Station (R1234yf) (2 of 2) .
-- Remove the rear expansion valve. Refer to REAR EXPANSION VALVE, REMOVING AND INSTALLING .
-- Remove the nut -B-.
-- Pry up the bracket -D- carefully from the center tunnel, at the same time loosen the bonding carefully.
-- Remove the refrigerant lines -A- and -C- from the refrigerant line connection to the evaporator in the rear heater and A/C unit.