Rear Fresh Air Blower -V80-, REMOVING AND INSTALLING, "Mid" OR "Mix" A/C SYSTEM, PR NUMBER KH5, 9AU: Removing
-- Remove the rear air distribution housing. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING, "Mid" OR "Mix" A/C SYSTEM, PR NUMBER KH5/ 9AU .
-- Remove the bolts -B-.
CAUTION:
Risk of damaging the fresh air blower if operated incorrectly.
Imbalance and problems during operation is possible.
- Avoid using force on the fan wheel.
- Never move the balancing weight on the fan wheel.
-- Pry up the air duct -A- in the area of the rear fresh air blower -C- and remove in the direction of the -arrow-.
-- Remove the adjustment motors, operating lever, and rear upper body vent temperature sensor on the air distribution housing. Refer to OVERVIEW - REAR ADJUSTMENT MOTORS .
-- Free up the wiring harness.