Air Intake Manifold From Heater And A/C Unit, Removing And Installing: Installing

Install in reverse order of removal. Note the following:

-- Check the insulation -E- in the evaporator housing -D- of the heater and A/C unit for damage, contamination (odor) and the correct installation.

-- Check the connection points between the air intake manifold -C-, and the evaporator housing -D- for the heater and A/C unit (groove/spring connection) for damage, and coat the connection points lightly with silicone grease, for example. Refer to OVERVIEW - HEATER AND A/C UNIT .

-- Install the front heater and A/C unit. Refer to HEATER AND A/C UNIT, REMOVING AND INSTALLING .

-- Re-install the remaining removed parts in reverse order.