Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING, "High" A/C SYSTEM, Q8, PR NUMBER 9AQ: Installing

Install in reverse order of removal and note the following:

• If the Rear A/C Display Control Head - E265- is replaced, perform the test plan to replace the Rear A/C Display Control Head -E265-. Refer to Vehicle Diagnostic Tester.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Press the Select custom test  button and select the following tree structure in order:

• Diagnostic-capable systems
• 0009 - Electronic central electric - J519
• 0009 - Electronic central electric, functions
• 0009 - E265 - Rear A/C Display Control Head
• → Replace control module