Fragrance Diffuser System Actuator -V687-, REMOVING AND INSTALLING: Installing

Install in reverse order of removal and note the following:

-- Check the wiring harness -3- for correct routing.

-- If the Fragrance Diffuser System Actuator -V687- -1- is replaced, perform the basic setting.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Press the Select custom test  button and select the following tree structure in order:

• Diagnostic-capable systems
• 0009 - Electronic central electric - J519
• 0009 - Electronic central electric, functions
• 0009 - Basic setting for climate control functions
• → Basic setting 6, program the end stops for Fragrance Diffuser System Actuator -V687-