BRACKET FOR Fragrance System Functional Unit -GX43- AND Air Freshening System Control Module -J1101-, REMOVING AND INSTALLING: Removing
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
Risk of fragrance leaking when tilting the.
- If there is a fault in the Air Freshening System Control Module -J1101-, the Fragrance System Functional Unit -GX43- or the Fragrance Diffuser System Actuator -V687-, the fragrance container valves may be open.
- If fragrance system components are faulty, then both containers with fragrance must be removed before removing the bracket.
-- Press the locking mechanism -4- in the -direction of arrow A- and at the same time, remove the hose -3- from the Air Freshening System Control Module -J1101- with Fragrance Diffuser System Blower -V686- -2-.
-- Remove the expanding rivet -arrow-.
-- Remove the bolts -2 and 3-.
-- Remove the bracket with the Fragrance System Functional Unit -GX43- and Air Freshening System Control Module -J1101- -1-.