A/C System Particulate Matter Concentration Sensor -G930-, REMOVING AND INSTALLING: Removing

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Remove the screw clips -A-.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the footwell cover -B- from the heater and A/C unit air intake manifold and remove.

-- Release and disconnect the connector -C-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -A-.

-- Release the retainers -B- and move the sensor -D- to the side.

-- Release the retainer -arrow- and disengage the connection -E-.

-- Remove the sensor -D-.