Outside Air Temperature Sensor -G17-, REMOVING AND INSTALLING: Removing
-- On vehicles with high-voltage system, switch on the "parking air conditioner" function (deactivate). Refer to the Owner's Manual.
-- Switch off the ignition.
-- Remove the cover on the lock carrier -F- and the left air intake motor. Refer to the appropriate service information .
TIP
- The bracket for the temperature sensor -A- depending on the version is either secured with an expanding clip -D- or with a bolt on the impact member of the bumper -E-.
-- Disconnect the connector -C- on the temperature sensor -B- and unclip the temperature sensor from the bracket -A-.