Right Rear Temperature Control Door Motor -V314-, REMOVING AND INSTALLING: Removing
-- Remove the right front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Switch off the ignition.
-- Remove the center console base support -A- and insulation -B-. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Label the connector -A- and the actuator -C- (to avoid a mix up in case several connectors are disconnected at the same time).
-- Release and disconnect the connector -A-.
-- Remove the bolts -B-.
-- Remove the actuator -C- from the relay lever -D-.