LEFT SIDE VENT MOTOR -V299-, REMOVING AND INSTALLING, ON "Mix" OR "High" A/C SYSTEM, PR NUMBER 9AU, 9AH, 9AQ: Removing
-- On vehicles with high-voltage system, switch on the "parking air conditioner" function (deactivate). Refer to the Owner's Manual.
-- Move the left front seat all the way to the rear.
-- Switch off the ignition.
-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the left footwell vent. Refer to DRIVER SIDE FOOTWELL VENT, REMOVING AND INSTALLING .
-- Label the connector -C- and the actuator -B- (to avoid a mix up in case several connectors are disconnected at the same time).
-- Remove the bolts -A-.
-- Remove the actuator -B- from the door shaft -D-.
-- Release and disconnect the connector -C-.