Threshold "A" In Mm
TIP:
- If the readout value is greater than the threshold "a" (table value): insufficient damping effect → replace shock absorber.
- If the readout value is less than the threshold "a" (table value): sufficient damping effect → shock absorber does not need to be replaced.
- The level of a vehicle with air suspension is not important for the test.
| Suspension | Front Axle | Rear Axle | Note | ||
|---|---|---|---|---|---|
| Standard suspension coil springs 1BA | In production | In production | Unloaded Full fuel tank (1) | ||
| Standard suspension air suspension 1BK | In production | In production | Unloaded Full fuel tank. Refer to (1) | ||
| Sport suspension air suspension 2MA | In production | In production | Unloaded Full fuel tank. Refer to (1) | ||
| Sport suspension air suspension 2MB | In production | In production | Unloaded Full fuel tank. Refer to (1) | ||
|
|||||