LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Installing

Wiper Blade, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Guide the wiper blade -1- parallel into the windshield wiper arm -2- in the direction of -arrow-. Make sure that the wiper blade is slid into the windshield wiper arm until the clip audibly engages.

Fig 1: Guide Wiper Blade Parallel Into Wiper Arm
GWWA92-10077Courtesy of AUDI

-- To leave the "Service position", either press the windshield wiper switch or drive faster than 6 km/h (3.7 mph).