LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Washer System >> Windshield Washer Fluid Level Sensor, Removing And Installing >> Removing

Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
GWWA92-10399Courtesy of AUDI

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.