LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Rear Window Washer System >> Washer Nozzle, Removing And Installing >> Washer Nozzle, Removing And Installing, Handle Button With Rearview Camera >> Removing

Washer Nozzle, Removing And Installing, Handle Button With Rearview Camera: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
GWWA92-10428Courtesy of AUDI

-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Release the clip in the direction of -arrow- and remove the washer fluid hose -1-.

-- Release the retainer -3-, and remove the washer nozzle -4- from the handle button -2-.