LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Rear Window Washer System >> Washer Nozzle, Adjusting

Washer Nozzle, Adjusting

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Adjust the washer nozzles for the rear window washer system. Refer to the appropriate Service Information.

-- Clean the dirty washer nozzle if the spray field does not match the specifications.

Washer Nozzle, Cleaning:

CAUTION:

There is a risk of damaging the washer nozzles through improper handling.

- Do not use any objects to clean the washer nozzles.

-- Remove the washer nozzle. Refer to WASHER NOZZLE, REMOVING AND INSTALLING, WIPER ARM .

-- Rinse the washer nozzle with clean water opposite the spray direction.

-- To remove any remaining contaminants, the washer nozzle may only be blown out with compressed air in the opposite direction of the spray direction.

-- If the spray field still does not correspond to the specifications, replace the washer nozzle.