A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Installing: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester.
-- Select Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Press the Select custom test button and select the following tree structure in order:
- Diagnostic-capable systems
- 00C5 - Thermal Management Control Module -J1024
- 00C5 - Basic Setting
- → Pressure-temperature sensors automatic addressing
-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .