LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Sunroof (87)) >> 60 Sunroof >> Sliding Sunroof >> Glass Panel, Removing And Installing >> Glass Panel, Removing And Installing, Rear >> Installing

Glass Panel, Removing And Installing, Rear: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Remove any locking fluid residue from the threaded hole using a thread tap.

-- Install the rear glass panel bolts, but do not tighten.

-- Adjust the rear glass panel (refer to GLASS PANEL, ADJUSTING ), then tighten the bolts.

-- Perform an adaptation. Refer to Sunroof Motor -V1-, PROGRAMMING .