Side Window, Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Pay attention to the repair information. Refer to REPAIR INFORMATION .
Required Tools and Materials for Removal and Installation. Refer to REQUIRED TOOLS AND MATERIALS FOR REMOVAL AND INSTALLATION .

-- Prepare the new window glass for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the undamaged window glass for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

Use One-Part Window Adhesive for Side Windows:D 169 300 M1 . If more than one window glass must be installed, the Two-Part Window Adhesive Kit:D 004 660 M2 can also be used.

-- Insert the new window glass into the opening for the window and first press it onto the C-pillar with the locating pins, and then press it onto the D-pillar with the locating pin.

-- On windows without a locating pin, align the window lengthwise to the edge on the side panel and then insert it into the cut-out for the window.

-- Secure the window in window opening with adhesive tape.

-- Observe minimum curing times. Refer to MINIMUM CURING TIMES FOR BONDED WINDOWS .

Further installation is performed in reverse order of the removal.