Damaged Side Window, Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Pay attention to the repair information. Refer to REPAIR INFORMATION .

Special tools and workshop equipment required

Window Cutter:V.A.G 1561A
Window Cutter - Blade, Offset:V.A.G 1561/10

-- Remove the C-pillar trim panel. Refer to C-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the D-pillar trim panel. Refer to D-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- In the window glass cutting area, protect the side panel and roof against paint damage with adhesive tape.

CAUTION:

Risk of injury to the hands and eyes from glass fragments.

Getting cut is possible.

- Wear protective eyewear.

- Wear safety gloves.

-- Protect the body and vehicle interior from glass splinters.

-- Tape off the flange all the way around with fabric-reinforced adhesive tape.

-- Remove the glass pieces up to the adhesive.

-- Slide the protective film (for example from Cutting Tool for Bonded Windows:VAS 6452 ) between the trim panels and the window rests.

-- Cut through the adhesive (with glass remnants) in the opening for the window using a Window Cutter:V.A.G 1561A and Blade Offset:V.A.G 1561/10 (with stopper roll).