Overview - Roof Railing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
- Nut
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- Tightening specification and sequence. Refer to Fig 2.
- Lifter
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- 1 Nm
- Seal
- Seal
- O-Ring
- Roof Railing
- Removing and Installing. Refer to ROOF RAILING, REMOVING AND INSTALLING .
- O-Ring
- Seal
- Seal
- Seal
- Roof Rack Recognition Sensor - G625-
- Market-Specific Version
- Removing and Installing. Refer to Roof Rack Recognition Sensor -G625-, REMOVING AND INSTALLING .
- Seal
- Market-specific
- Lifter
- Removing and Installing. Refer to LIFTER, REMOVING AND INSTALLING .
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- 1 Nm
- Nut
- Insert with locking fluid. Refer to the appropriate Electronic Parts Information.
- Tightening specification and sequence. Refer to Fig 2.
- Wire
Roof Railing - Tightening Specification and Sequence
-- Tighten the nuts to 10 Nm in the sequence -1 through 4-.