LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Hood, Lids (87)) >> 55 Hood, Lids >> Rear Lid >> Rear Lid, Adjusting >> Adjustment Dimensions

Adjustment Dimensions

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
GWWA55-10920Courtesy of AUDI
  1. A -  Rear Lid to Bumper Cover
    • Gap dimension = 4.8 mm
  2. B -  Rear Lid to Bumper Cover
    • Gap dimension = 4.5 mm
  3. C -  Rear Lid to Side Panel
    • Gap dimension = 5.0 mm
  4. D -  Rear Lid to Side Panel
    • Gap dimension = 4.0 mm
  5. E -  Rear Lid to Roof
    • Gap dimension = 5.0 mm
  6. F -  Rear Lid to Rear Lid End
    • Gap dimension = 5.0 mm
scientia non olet · About LEMON Manuals