Rear Lid Opener Control Module -J938-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -arrows- on the lower section of the bumper cover.

Courtesy of AUDI

TIP:

The quantity of bolts -arrows- varies depending on the model.

-- Disconnect the connectors -2 and 3-.

Courtesy of AUDI

-- Release the retainers in the direction of -arrows-.

-- Remove the control module -1- from the mount.