Overview - Rear Lid, Security: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Only differences from the standard production are described.
- Rear Lid
- Prepare the new rear lid after painting. Refer to Preparing the new rear lid after painting: .
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING, SECURITY .
- Protecting Plate
- Rear Lid
- Protecting Plate
- Cable cover
- Top right
- Tightening Specifications:
- Nut: quantity 2, 28 Nm
- Protecting Plate
- Cover
- Top center
- Tightening Specifications:
- Nut: quantity 3, 28 Nm
- Protecting Plate
- Cable cover
- Top left
- Tightening Specifications:
- Nut: quantity 2, 28 Nm
- Protecting Plate
- Windshield wiper motor cover
- Tightening Specifications:
- Nut: quantity 4, 28 Nm
- Protecting Plate
- Tail Lamp Cover
- Left
- Tightening Specifications:
- Nut: quantity 2, 28 Nm
- Protecting Plate
- Closing assist cover
- Tightening Specifications:
- Nut: quantity 3, 28 Nm
- Rear Lid Closing Assist Motor -V382-, Removing and Installing. Refer to Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING, SECURITY .
- Closing Assist Release Cable, Removing and Installing. Refer to CLOSING ASSIST RELEASE CABLE, REMOVING AND INSTALLING, SECURITY .
- Protecting Plate
- Latch cover
- Tightening Specifications:
- Nut: quantity 2, 28 Nm
- Latch, Removing and Installing. Refer to LATCH, REMOVING AND INSTALLING, SECURITY .
- Protecting Plate
- Tail Lamp Cover
- Right
- Tightening Specifications:
- Nut: quantity 2, 28 Nm