Adjusting Buffer, Removing And Installing, Body Side: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
TIP:
To secure the adjusting buffer, the Pop Rivet Screw:WHT 005 180 must be inserted using the Pop Rivet Pliers:V.A.G 1765C and Pop Rivet Pliers - Supplement Pieces :V.A.G 1765C/2 . Refer to the appropriate detailed information. The >>infomedia search<< can be used here to search for the Pop Rivet Screw:WHT 005 180 in the respective chapter.
-- Adjust the adjusting buffer. Refer to HEIGHT, ADJUSTING USING ADJUSTING BUFFER .