Latch, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- If required, remove the air filter housing. For TDI vehicles, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING - 2.0L DMSA , AIR FILTER HOUSING, REMOVING AND INSTALLING - 2.0L DPVA . For TFSI vehicles, refer to AIR FILTER HOUSING, REMOVING AND INSTALLING - 3.0L .
-- Disconnect the connector -2-.
-- Free up the connector -1-.
-- Free up the release cable -4- on the lock carrier -5-.
-- Remove the bolts -arrows-.
-- Remove the latch -3- downward.
-- Release the catches -4- and remove the support bracket from the mount -3- in the direction of -arrow-.
-- Pull the release cable nipples -1 and 2- out of the release levers on the latch.
-- Remove the latch.