Insulation, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- First slide the insulation over the tabs on the rear edge and into the designated cut-outs on the inner panel -3-.
-- Insert the tabs at the front edge and sides.
-- The clips must engage audibly when pressing in.