LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Body Front (87)) >> 50 Body Front >> Bulkhead >> Plenum Chamber Side Cover, Removing And Installing >> Removing

Plenum Chamber Side Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear cover. Refer to REAR FENDER COVER, REMOVING AND INSTALLING .

-- Use the Wiring Harness Repair Set - Hot Air Blower:VAS 1978/14A  to warm up the cover -1- carefully near the A-pillar.

GWWA50-11230Courtesy of AUDI

-- Pry out the cover in the direction of -arrows- and remove it carefully near the bonding -2-.