Rear Bonded Rubber Bushing For Rear Final Drive, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear final drive. Refer to the appropriate Service Information. .
-- Equipment versions with steering adapter: remove the bolts -arrows-, lower the steering adapter slightly and secure.
-- Mount the Puller - Differential Bearing:T40032 and Rear Bushing Tool:T40033 on the bonded rubber bushing and on the subframe as shown.
-- Remove the bonded rubber bushing from the subframe.