SUBFRAME, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Tighten the subframe bolts and tighten in a diagonal sequence without an additional turn.
WARNING:
Risk of accident!
- If the vehicle will be driving on the streets, all bolts and nuts must be tightened properly according to the guidelines.
-- A road test must be performed after completing repairs. If the steering wheel is crooked, the wheels must be aligned . Refer to AXLE ALIGNMENT .