Pressure Reservoir, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Vent the system. Refer to AIR SUSPENSION SYSTEM, FILLING AND BLEEDING .
-- Switch off the ignition.
-- Remove the left underbody trim panel. Refer to OVERVIEW - UNDERBODY TRIM PANELS .
-- Slowly loosen the air line -2- on the pressure reservoir -1- and allow air pressure to escape. After the air pressure has escaped, remove the air line.
-- Remove the bolts -arrows- and remove the pressure reservoir.