Boot, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the shock absorber fork. Refer to SHOCK ABSORBER FORK, REMOVING AND INSTALLING .
-- Pay attention to the installation position of the boot. Refer to Figure.
- Before tensioning clamps, make sure boot is not twisted.
-- Pay attention to the installation position of the air line clips and the lock washers. Refer to Figure and Refer to Figure.
-- Clamp, Tensioning using Clamping Pliers:V.A.G 1682A . Refer to Figure.