Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the nuts -2-.
-- Loosen the hose clamps -3-, clamp off the coolant hoses with the :3094 and then remove them.
-- Remove the bolts -arrows- and remove the Coolant Recirculation Pump -V50- from the bracket.