LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Cooling System (6-Cylinder Direct Injection 3.0L 4V TFSI Engine Ea839)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Rear Coolant Pipe, Removing And Installing >> Removing

Left Rear Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the engine cover and heat shield. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

GWWA19-12589Courtesy of AUDI

-- Loosen the hose clamp -1- and remove the coolant pipe -2-.

-- If necessary free up the wiring harness.