Transmission Mount, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Transmission Support, Removing with Transmission Mount

-- Remove the tunnel crossmember. Refer to the appropriate Service Information. .

-- Remove the bolts -arrows- and remove the transmission support -1- with the transmission mount from the transmission.

Courtesy of AUDI

Transmission Mount, Removing and Installing

Fig 1: Exploded View Of Transmission Mount

Courtesy of AUDI

-- Remove the bolts -1- and remove the stop -2- for the transmission mount.

-- Remove the nut -5- and remove the transmission mount -3- from the transmission support -4-. (The transmission support does not correspond to the version in the vehicle.)

Installing

Install in reverse order of removal and note the following:

-- Tighten the nut -5- hand-tight.

-- Tighten the bolts -1- and then the nut -5-.

-- Install the transmission support with the transmission mount.

Tightening Specifications

Refer to the appropriate Service Information .