LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Cooling System (1 Of 2)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Left Front Coolant Pipe, Removing And Installing >> Removing

Left Front Coolant Pipe, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the lower air duct pipe. Refer to UPPER AIR DUCT PIPE, REMOVING AND INSTALLING .

-- Remove the ribbed belt from the A/C compressor. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the left front lower longitudinal member. Refer to LOWER LONGITUDINAL MEMBER, REMOVING AND INSTALLING .

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING / A/C COMPRESSOR, REMOVING AND INSTALLING FROM BRACKET .

-- Remove the bolts -arrows- and remove the left front coolant pipe -1- from the coolant pump.

GWWA19-12531Courtesy of AUDI OF AMERICA, LLC