LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Bumpers (87)) >> 63 Bumpers >> Rear Bumper >> Bumper Cover Trim, Removing And Installing >> Exhaust System Trim, Removing And Installing, S Line, Sq5 From Product Improvement >> Removing

Exhaust System Trim, Removing And Installing, S Line, Sq5 From Product Improvement: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

-- Vehicles with TDI engine, right side of the vehicle: remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release the retainers on the inner side -arrows-.

GWWA63-12072Courtesy of AUDI

-- Remove the trim -2- from the lower section of the bumper cover -1- rearward.