LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Bumpers (87)) >> 63 Bumpers >> Front Bumper >> Bumper Cover, Adjusting >> Length Adjustment:

Length Adjustment:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
GWWA63-11307Courtesy of AUDI

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Loosen the bolts -1-.

-- Adjust the bumper cover lengthwise according to the markings -arrow-.

-- Tighten the bolts.

-- Check the gap dimension for evenness, and repeat the adjustment if necessary.