Steering Gear End Positions, Adapting
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If the connection between the steering gear and the steering wheel is disconnected, the end position of the steering gear must be readapted.
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Chassis
- Steering
- 01 - OBD-capable systems
- 44 - Power Steering Control Module J500
- 44 - Power Steering Control Module Functions
- 44 - Basic Setting
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.