Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- After installing a new Power Adjustable Steering Column Control Module -J866- activate the control module.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Electrical Equipment
- 0001 - OBD-capable systems
- 0009 - Vehicle Electrical System Control Module J519
- 0009 - Power Adjustable Steering Column Control Module J866
- J866 Power Adjustable Steering Column Control Module J866 Basic Setting
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.