Cover And Cushion, Removing And Installing, Bench Seat: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Audi SQ5, 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi SQ5, and 2023 Audi Q5 e. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Pry Lever:80-200

Fig 1: Identifying Pry Lever
Courtesy of AUDI

Removing

-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Remove the clips -1- using the Pry Lever:80-200 .

Courtesy of AUDI

-- Pry the cover clamping strip -2- through -6- out from the molded part using a screwdriver along the seat frame.

-- Remove the cover and cushion from the seat frame.